• Place the two hooks of the Surflock around the leash pin (or around the fin adapter when installed in the fin slot).
• Slide the two plates together, ensuring the hooks close around the leash pin.
• Loop the Zavaii combination cable around any stationary object, such as a loop, and thread the cable end through the two aligned holes of the Surflock.

WARNING:

• This adapter comes with a special screw. Once installed, it cannot be removed.
• This adapter is designed to fit only in the central fin box of boards generally 7′ and longer.

HOW TO INSTALL IT

• Remove the central fin.
• Insert the adapter into the fin box.
• Slide the adapter along the groove of the fin box, either forward or backward, depending on where you prefer to position the fin.
• Ensure the “open” part of the adapter faces the center of the fin box and the screw is at the outer end.
• Tighten the screw to secure the adapter.

TO UNLOCK:
Set the numbers to 0-0-0, press the release button to disengage the cable head, and remove it from the lock and secured equipment.

TO LOCK:
Loop the cable around a fixed object, thread the cable through any other items, pass it through the cable loop, insert the cable head into the lock until it clicks, and scramble the numbers to secure everything.

TO SET A NEW COMBINATION:
Set the numbers to 0-0-0, press and turn the silver reset button underneath the lock 90° clockwise with a screwdriver, set your new combination, turn the reset button 90° counterclockwise, and safely store your combination. Your lock is now ready to open with the new combination.

To lock the padlock, place the keys inside the safe box and close it gently. Insert the padlock into an anchoring point and close it. Then, rotate the numbers to hide the unlocking code. To unlock the padlock, enter the code using the 4 dials, open the safe box, take the key, and remove the padlock.

SETTING THE CODE

• With the combination 0-0-0-0, open the box while looking at the front side.
• Push the internal reset lever behind the lock from right to left.
• Enter your combination, e.g., 1-2-3-4.
• Return the reset lever from left to right.

The padlock is ready!

HOW TO OPEN:

• After setting the code as explained, rotate the numbers to match your combination and slide the cover upwards to open the box.
• To open the shackle, push the release lever in the direction of the arrow, pull the shackle upwards, and pass it through the anchoring point.

HOW TO CLOSE:

• Rotate the numbers to match your combination and slide the cover downwards to close the box.
• To close the shackle, hold the release lever in the direction of the arrow, reposition the shackle, and release the release lever.
• Rotate the numbers after closing.

OPEN THE SHACKLE

• Open the box.
• Push the release lever in the direction of the arrow.
• Open the shackle of the box.
• Pull the shackle upwards.
• Pass the shackle through the anchoring point.

CLOSE THE SHACKLE

• Hold the release lever in the direction of the arrow.
• Reposition the shackle.
• Release the release lever.